SPECS IN GENERAL

SPECIFICATIONS: Product code matches code for specification of same goods listed on smice board. Don’t get confused with other same country products. The code applied on smice matching specs here are the correct specs for those goods . I will attempt to list all specs at time I recieve such if specs given are ‘cut and past’ application- if I need to extract spects and make a new document , this will cuase delays - specs with frames applied via email should be avoided when sending to FTN as I can’t often cut and paste frames. Formats provided to FTN similar to IRON ORE specs below are easy for me to cut and paste. Specification are used to apply to current goods or to check goods as offered by other in matters of due diligence. Major product like Sugar , Ethanol, Urea- Those specs are standard as found from may suppliers around the world in similar form - hence may be used to source specific goods. I define these goods as having ‘ fixed specs” Notes: It is improper to ask for instance- a Sth African coal supplier for coal using indonesian specification. Coal grades vary from country to country. I define such ‘specs’ as ‘variable specs’ It’s imporper to use a BOL from past deliveries to imply evidence of current supply. All orders are unique as per the goods ordered on board at that time. A supplier must provide specification- Such offers ftn the opportunity to conduct due diligence on such to see if goods offered are genuine. If you are sourcing goods, then supplier MUST provide specs. If you have goods that need to be sourced , then BUYER must provide specs. If you approach a end buyer (or get an inquiry form such) with SMICE listed goods and you need to work fast and don’t have specs, then offer only a basic quote by e-mail with GRADE, DELIVERY AND PRICE applied. CEMENT PRODUCT CODE: CEM 01 Chemical Analysis E.S.4756/2007 Percentages %   Silicon Dioxide SiO2 ---- 20.04   Insoluble Residue ≤ 5.00   0.57 Aluminium oxide (Al2O3) ---- 4.97   Ferric Oxide (Fe2O3)   4.22   Calcium Oxide (CaO)   62.85   Magnesium oxide (MgO)   1.64   Sulpher trioxide (SO3 ≤ 3.50   2.90 Sodium oxide ( Na2O)   0.38   Potassium oxide ( K2O) 0.19     Eqv.alkalies ( Na2O+0.658*K2O )   0.50   Loss on ignition ≤ 5.00 1.60   Chloride (Cl) ≤ 0.10 0.05   Physical and Mechanical Requirements Chemical Analysis E.S.4756/2007 Percentages % Specific Surface Cm2 / gm 3300 ----- 3300 Setting time : Initial (min.) ≥ 60.00 165 Le chatelier expansion (mm) ≤ 10 1.0 Compressive strength ( N / mm2 ) After 2 Days ≥ 10 19.27 After 7 Days ---- 32.05 After 28 Days 42.5 46.57       COAL:CL-02 61-6300: Total Moisture ARB 16% max: Inherent Moist ADB 12% Max. Sul 0.8-1.0% Max 56-5800: Total Moisture ARB 28% max: Inherent Moist ADB 12-16% Max. Sul 1.0% Max 53-5500: Total Moisture ARB 38% max: Inherent Moist ADB 14% Max. Sul 0.10% Max 51-5300: Total Moisture ARB 34% max: Inherent Moist ADB 14-18% Max. Sul 1.4% Max CL-02 Coal 61-6300 GCV Black Origin Indonesia DESCRIPTION No. Parameter Basis Typical Rejection Unit Test Method 01 Total Moisture ARB 16 Max >18 % ASTM D 3302 - 02a 02 Inherent Moist ADB 12  Max. --- % ASTM D 3173 – 03 03 Ash Content ADB 15 Max. >17 % ASTM D 3174 – 02 04 Volatile Matter ADB 35-45 Max --- % ASTM D 3175 – 02 05 Fixed Carbon ADB By diff --- % ASTM D 3172 – 02 06 Total Sulphur ADB 0.8-1 max >1.1% % ASTM D 4239 – 02a Hard Grove Index ADB 39-45 Min Index Point ASTM D 409 – 02 Gross Caloric Value ADB 6300 <6100K cal/Kg ASTM 5865 – 03 Size ( 0 -50mm) ADB 90% Passing Min mm ASTM D 4749 – 07 CL-02 Coal 5300-5100 GCV Black Origin Indonesia DESCRIPTION No. Parameter Basis Typical Rejection Unit Test Method 01 Total Moisture ARB 34 Average >36 % ASTM D 3302 - 02a 02 Inherent Moist ADB 14-18  Average --- % ASTM D 3173 – 03 03 Ash Content ADB 4-6 Average. >8 % ASTM D 3174 – 02 04 Volatile Matter ADB 39-42 Average --- % ASTM D 3175 – 02 05 Fixed Carbon ADB By diff --- % ASTM D 3172 – 02 06 Total Sulphur ADB 1.4 max >1.6%% ASTM D 4239 – 02a Hard Grove Index ADB 39-45 Min Index Point ASTM D 409 – 02 Gross Caloric Value ADB 5300 <5100 Kcal/Kg ASTM 5865 – 03 Size ( 0 -50mm) ADB 80% Passing Min mm ASTM D 4749 – 07 JASIMINE RICE : JR-03 Broken 5.0% max Moisture 14.5% max Damaged kernels 0.5% max Yellow kernels 0.5% max Foreign matters 0.1% max Paddy kernels 7 seeds/KG max Chalky kernels 3.0% max Red kernels 0.5% max Glutinous rice 0.5% max Mixture of other grain 15% max Whole grain 60% min Milling degree Well milled and double polished IRON ORE: IRN-04 IRON ORE SPECS Items for Quality Specifications Rejection Fe 63.00% < 60.00% SiO2 3.00% >4.00% Al2O3 2.00% >2.50% Sulfur 0.08% > 0.10% Phosphorus (P) 0.08% >0.10% TiO2 0.80% >0.90% Moisture Content 6.00% >8.00% Hard Grove Index (HGI) 45 Index Point Size 10 – 50 mm (90%) Over 50 mm Not More than10%

SULPHUR
	SPECIFICATIONS SULPHUR FROM CHINA 26TH OCTOBER 2011 Sulphur ≥ 99.5%, Ash ≤ 0.09%, Carbon 0.28%, Moisture 0.5%, Acidity 0.0048%

coal sk01

COAL: Smice Product -COALSK01 below the complete specs: PARAMETER BASIS Guarantee REJECTION         Gross Calorific Value (ADB) 5800kcal/kg 5600kcal/kg Total Moisture (ARB) 28% >30% Inherent Moisture (ADB) 12-16%   Ash Content (ADB) 12% >15% Volatile Matter (ADB) 40% approx.   Fixed Carbon (ADB) By difference   Total Sulphur (ADB) 1% >1% HGI 50 up     Size 0-50mm 90%     PORTLAND CEMENT CODE-PCV001 Please retype from PDF advice download.

IRON ORE PAKISTAN (PAK0RE1) Fe(t) AV 61.23% Min 58 -Max 63 FeO 1% Iron (II)oxide 86.45% SiO2 8.7% AL2O3 0.34% CaO 0.52% MgO 0.56% P 0.02% S 0.02% CHROME ORE PAKISTAN(PAK CHR1) TEST Report By SGS: Parameters Method Test Result       Chromium Oxide (cr2o3) Based on ISO 6331-1983 (E) 57.59%       Silica ( Sio2) Based on ISO 5997-1984 (E) 01.13%       Iron (Fe2O3) Based on ISO 6130-1985 (E) 14.30%       Alumina (Al2O3) Based on ISO 6331-1983 (E) 10.68%     Cr:Fe calculated 03.94%       FTNXX SPECIFICATIONS For use by only FTNX agents making their own quotes and offers-The list will continue to grow. Designed for cutting and pasting directly onto FTNX agents own forms . When list gets too big, please apply master password if encrypted PDF eventuates- LISTED SPECS ARE “PROVISONAL” SPECS- FINAL OFFER/CONTRACT DICTATES FINAL SPECS SUGAR BRAZIL SMICE REF: SUG45:1 AND OR 45 IC Specifications and Grade: Substance: Solid Crystal Max CU: 3 P.P.M. Max PS: 2 P.P.M. Max AS: 1 P.P.M. HPN Staph Aureus: Nill Reducing Sugar 0.05% Max by weight Smell: Free of any smell Sediments: None Sulphur Dioxide: 20mg/kg min. Ash by Electrical Conductivity: 0.04% Max. (on dry weight basis) SO2: 70Mg/K Magnetic Particles: 4Mg/K Crop:2009/10 Moisture: 0.4% Max Granulation: Fine Crystal Index units (Icumsa method no: 4.1978) Colour: White. Maximum 45 Icumsa attenuation Solubility: 100% Dry and Free Flowing Icumsa: 45 RBU Max. (Brazil S.G.S Scale) (Note; Not Sao Paulo scale) Ash Content: 0.04 Max. Polarization: 99.80 Degrees min. Commodity: White Refined Cane Sugar Product Origin:SANTOS, BRAZIL . UREA 10 GENERAL SPECIFICATION. Fertiliser Grade: 45-46 % Nitrogen Range White Crystals mp:132.7C Mass part nitrogen: 46.2% Buret, not more than: 1.0% Moisture not more than: 0.5% Granulometry (granules size) : 2.2mm to 4mm 90% min. Asphalt 70-100 Grade SMICE REF: BTM 70-100 PROPERTY...TEST UNIT...GUARANTEE.......ASTM...........IP............ Penetration at 25 °C, 100 g, 5 sec x 0.1 mm 70 / 100 D 5 EN 1426 Softening point (ring and ball method) °C 43 - 51 D 36 EN 1427 Resistance to hardening (RTFOT) (a) at 163 °C D 1754 EN 12607-1 or EN 12607-2 Mass change (Loss on heating) % 0.8 Max D 6 Retained penetration (penetration of residue after RTFOT as compared to penetration before heating) % 46 Min D 5 EN 1426 Softening point after hardening °C 45 Min D 36 EN 1427 Flash Point °C 230 Min D 92 EN 22592 (ISO 2592) Solubility wt % 99 Min D 2042 EN 12592 Increase in softening point °C 9 Max D 36 EN 1427 (a) RTFOT (Rolling Thin Film Oven Test) method must be used as reference test. OTHER GRADE AVIALABLE Asphalt, MC-30 Asphalt, MC-800 Asphalt, Pen. AC 50-70 Asphalt, Pen. AC 70-100 Asphalt, Pen. AC 100-150 Asphalt, Pen. AC 160-220 DIESEL: TURKEY SMICE REF: ULSD1 PROPERTY...TEST UNIT...GUARANTEE.......ASTM...........IP............ Density at 15 0C kg/m3 820-845 EN ISO 3675 EN ISO 12185 Polycyclic aromatic hydrocarbons wt % 11 max EN 12916 Flash Point 0C 55 min EN 2719 Cold Filter Plugging Point (CFPP) 0C EN 116 Winter Grade (a) -15 max Summer Grade (b) 5 max Distillation EN ISO 3405 Recovered at 250 0C vol % 65 max Recovered at 350 0C vol % 85 min 95%(vol/vol) recovered at 0C 360 max Sulphur mg/kg 10 max EN ISO 20846 EN ISO 20884 Carbon Residue (on 10 % residue) wt % 0,30 max EN ISO 10370 Viscosty at 40 0C Cst 2,0-4,5 EN ISO 3104 Copper Strip Corrosion (3h at 50 0C) rating No.1 max EN ISO 2160 Ash wt % 0,01 max EN ISO 6245 Cetane number 51 min EN IS 5165 Cetane Index Calculated 46 min EN ISO 4264 Water mg/kg 200 max EN ISO 12937 Particulate Matter mg/kg 24 max EN 12662 Oxidation Stability g/m3 25 max EN ISO 12205           Lubricity,corrected (wsd) at 60 0C µm 460 max EN ISO 12156-1 (a) 1 October-31 March (± 15 days) (b) 1 April-30 September ( ±15 days) Liquid Petroleum Gas (A) ( Automotive) SMICE REF: LPG -A Property Test Unit Guarantee Limit Test Method (EN/IP) Test Method (ASTM) Motor octane number, MON 89 Min Annex B (*) Dienes Content (as 1.3 butadiene) mole % 0.5 Max EN 27941 or IP 405 or UOP 539 D2163 Hydrogen Sulphide negative EN ISO 8819 or IP 401 D5623 Total sulfur content mg/kg 50 Max EN 24260 or IP 243 D6667 D5623 Copper Strip Corrosion (1 h at 40 °C) rating Class 1 Max EN ISO 6251 or IP 411 D1838 Evaporation residue mg/kg 100 Max EN ISO 13757 or IP 427 Vapour Pressure, gauge at 40 °C kPa 1550 Max EN ISO 4256 or IP 410 EN ISO 8973 D1267 Vapour Pressure, gauge, min 150 kPa at a temperature for winter grade (1) °C -5 Max EN ISO 8973 or IP 432 and Annex C (*) D1267 Free Water content at 0 °C None Visual (2) Odor (3) Distinctive and unpleasant at 20 % Lower flammability limit. Annex A (*)                 (*) Annex A, B and C calculation methods are given at TS EN 589 1) Winter grade : 1 October-31 March ( ± 15 days ) 2) EN ISO 3993 may be used for free water content. If density required, EN ISO 3993 or ISO 8973 or IP 235 is recommended. 3) Stenching agent is not added. CAUSTIC SODA SMICE REF: CASDA1 GRADE/FORMULA: Na OH MAIN SPECIFICATION: CAUSTIC SODA FLAKES NaOH:99% MIN Na2CO3:0.6%MAX NaCL:0.1% MAX Fe203:0.01%MAX COLOUR: WHITE DECOMPOSITION :2.13 MELTING POINT:318C BOILING POINT : 1390 C SOLUBLE IN :WATER AUSTRALIAN COAL SMICE REF: ASTCL1 ASH ANALYSIS (Typical) Silicon as SiO2 %55.5 Aluminium as Al2O3 % 28.6 Iron as Fe2O3 % 9.6 Calcium as CaO % 1 Magnesium as MgO % 0.42 Sodium as Na2O % 0.19 Potassium as K2O % 0.26 Titanium as TiO2 % 1.68 Manganese as Mn3O4 %<0.01 Sulphur as SO3 %0.09 Phosphorus as P2O5 % 0.759 Barium as BaO 0.2 Strontium as SrO 0.14 Zinc as ZnO0.08 Total 98.519 Parameter As Received Air dried basis Total Moisture 23 Inherent Moisture 15.5 15.5 Ash 8.201183432 9 Volatile Matter 27.063905325 29.7 Calorific Value Gross (kcal/kg) 5011.00 ABD5500 Nett (kcal/kg) NAR 4666.00 HYDRATED ETHANOL REF:ETHY1 Item Unity Value Method Acidity, as acetic acid MG/L MAX 30 ASTM D1613 Alcoholic degree by volume GRADE GL MIN 95.1 Alcohometer Alcoholic degree by weight º INPM - 92.6 to 93.8 Alcohometer Appearance - - (*) VISUAL Chlorides MG/KG MAX 1 ASTM D512 Color - 0 (**) VISUAL Electrical conductivity MS/M MAX 500 ASTM D1125 Hydrocarbons content - MAX Not Detectable ASTM D1722 Iron MG/KG MAX 5 ASTM E394 PH - - 6.0 TO 8.0 ASTM D6423 Residue by evaporation MG/100ML MAX 5 ASTM D1353 Sodium MG/KG MAX 2 ASTM D5185 ASTM D5185                 Sulphates MG/KG MAX 4 Turbidimetric                     RICE SMICE REF: RCE1 MAIN SPECIFICATION:STANDARD: APPLIED ON OFFER BROKEN (BASIC 3/4) 5% MAX FOREIGN MATTERS 0.1% MAX CHALKY KERNEL (BASIC 3/4) 6% MAX RED STREAK KERNEL 1.5% MAX YELLOW KERNEL 0.5% MAX DAMAGED KERNEL 0.5% PADDY GRAINS 15% MOISTURE 14% FUEL OIL No 6 SMICE REF: FO6:1 Ash, Wt Pct 0.1 Max EN ISO 6245 Density at 15 deg C , kg/lt 0.9900 Max EN ISO 3675 Flash Point, Deg C 70 Min EN ISO 2719 Pour Point, Deg C 21 Max ISO 3016 Water ,Vol pct 0.5 Max ISO 3733 Total Sediment ,Wt pct 0.15 Max ISO 10307-2 Sulphur, Wt pct 3.0 Max EN ISO 8754 Viscosity at 100 deg C, cSt 50 Max EN ISO 3104 Vanadium, ppm 180 Max IP-285 Conradson Carbon Residue, Wt pct 15.0 Max EN ISO 10370 Asphaltenes, Wt pct 5.0 Max IP-143 or ASTM D-3279 PROPERTIES GUARANTEED TEST METHOD IRON ORE FINES SMICE REF:IOF 1 MAIN ANALYSIS: (Percentage by weight-) Specification Guaranteed Chemical Composition Rejection       Fe 63.5% 62.5% SiO2 3.5% max 4.0% AL203 3.5% max 4.0% P 0.05% max 0.06% S 0.03% max 0.05% Moisture(Free loss at 105 degrees centigrade) : 8% max 10%       Physical (Size) : +10 mm 5% max   -10mm 95% min   -150 microns 30% max       REF:IOF 2 Specification Guaranteed Chemical Composition Rejection       Fe 63+% 62.5% SiO2 4.5% max 3.5% AL203 4.5% max 3.5% P 0.07% max 0.05% S 0.06% max 0.04% Moisture(Free loss at 105 degrees centigrade) 10% max 12%       Physical (Size) 0- 10 mm 90% max   10mm + 10% min MESH 150 Microns or less 30%         INDONESIAN COAL SMICE REF: INCL1 Quality Parameters Basis Typical Reject         Total Moisture Arb 15 - 18 % Max   Inherent Moisture Adb 8 – 10 Approx   Ash Content Adb 14- 18 % Max   Volatile Matter Adb 38 – 43 Approx   Total Sulphur Adb 1.1 Max   Gross Calorific Value Adb 6300 kcal/kg < 6100 kcal/kg Hard Grove Index Adb 38 Min   Size   0-50 mm 85 % Max   REF:INCL3 Basis Specification         Total Moisture ARB 14 - 16 %, rejected if above 18%       Inherent Moisture ADB 8 % - 14% max       Ash Content ADB 12 % Max, rejected if above 18%       Volatile Matter ADB 35 – 40 %, rejected if above 43%       Fixed Carbon ADB By Difference       Total Sulphur ADB 1.0 % max, rejected if above 1%       Gross Calorific Value ADB 6,300 - 6,100 kcal/kg       HGI (as per ASTM ) 40 - 50         Size 0 – 50 mm 90%       rejected if below 6,100 kcal/kg AUSTRALIAN SUGAR SPECS SMICE REF IC 100 or 150 Caracteristics Export Caster Sugar Extra Caster Sugar M 30 Colour ICUMSA (UI) <100 100-150 <150 Pol Min. (°S) 99,7 99,7 99,7 Um. Max (%) 0,06 0,06 0,06 Ashes Máx (%) 0,05 0,05 0,05 Black Points max (N/100g) 7 7 7 Magnetic Points max (mg/kg) 5 5 5 Insoluble Residues 5 5 5 SO2 Max (mg/kg) 20 20 20 Granulemetry -mesh 30 retention - - <5% Mould + yeast (ufc/g) 1000 1000 1000 Salmonella (in 25g) absent absent absent Faecal coliformes absent absent absent Totals absent absent a

5th May 2011: DEISEL SPECS:Product Number:250D2: CHARACTER Density at 15C kg/lt Distillation Pour Point 90% recovery C Flash Point “PM” C Fluxion point C Carbon residue micro method % mass Ash % weight Viscosity Kinematic at 40 C cSt Saybolt Universal at 40 C Total Sulphur, X rays % mass Copper Strip Test (3 to 50 C ) Cetane index ASTM Colour Total Acidity, mg KOH/g Inorganic acidity, mg KOH/g Sediment extracted ppm Water By Karl Fischer proc (pm) LIMITS MIN 0.820 - 66 - To be indicated - 2.10 33.3 - - 45 - - - 0 30 MAX 0.860 - 385 - * 0.15 0.01 5.50 44.9 0.30 No2 - 2.5 1 nula 0.05 500 METHOD OF TESTING ASTM 4050 ASTM D 1298 ASTM D 86 ASTM D 93 ASTM D5950 ASTM D 4530 ASTM D482 ASTM D445 ASTM D2161 ASTM D 4294:129 ASTM D 130 ASTM D 976 ASTM D 1500 ASTM D664: D 974 ASTM D 664: D 974 ASTM D473 ASTM D 1744 Water by Distillation % Volume Water and Sediments % Volume Lubrication Filtration - - to be indicated to be indicated 0.05 0.05 - - ASTM D1796 ASTM D 1796 ISO 12156-1 IP 438 *From 15 December to 15 April Max +9C *From 15 December to 15 July Max +3C *From 15 July to 15 December Max +6C

ANIMAL FEED
	ANIMAL FEED : GOA INDIA : TEST WEIGHT MIN 63 KG/HL, PROTEIN ON DRY BASIS MIN 9%, CRUDE FIBRE MAX 2.7%, MOISTURE MAX 12%, FOREIGN MATTER MAX 2%, BROKEN KERNEL MAX 4%, OTHER GRAINS MAX 1%, AFLATOXIN (TOTAL) MAX 20 PPB, TOTAL VOLATILE NITROGEN (T.V.N.) MAX 40 MG/ 100 GRAM, LIVE INSECT / FUNGAL DISEASE: FREE, SALMONELLA & E-COLI: FREE 50 KG EXPORT BAGS

WHEAT OFFER 10/10

Wheat offered : 10/10/2011: FULL PROPER NAME OF GOODS OFFERED (a) INDIAN MILLED WHEAT GRADE 1 (b) OFFER DATE: 7 October 2011 (c) TRANSACTION CODE: (d) VALIDITY: 15 days GRADE AND SPECIFICATIONS (Must be filled in . separate Jpeg sheet not accepted ) Origin: India Protein: 11% Min(ON DRY BASIS) Moisture Content: 12% Max Test Weight: 76 KG/HL Min Broken, Shrunken and Shriveled Grain: 4.0% Max Foreign Matter: 2.0% Max Damaged Grains: 1.0% Max Other Food Grains: 2.0% Max Weevilec/Board Grains: 1.0% Max Free from live insects GLUTEN : 23 % ( ON WET BASIS ) (Mark with ‘X” as Required) PORT OF LOADING (a) KANDLA PORT, INDIA